
Last Updated: November 1, 2026
Quick Summary
Custom bathroom vanity installation in Pickering means removing the old vanity, checking the wall, plumbing and floor, then fitting a made to measure unit. The new cabinet, countertop, sink and faucet must sit level, drain correctly and close cleanly. The work runs in order from removal and inspection through cabinet fitting, countertop and sink install, plumbing connections, then sealing and leak testing.
- Measure the alcove at the back, middle and front to check whether walls are out of square.
- Build the cabinet to the smallest alcove figure and use a filler piece for gaps.
- Confirm doors and drawers clear the doorway, toilet and any radiator before ordering.
- Moving the drain even a few inches is plumbing work, not carpentry.
- Installation cost depends on cabinet size, countertop material, plumbing position and old unit removal.
Table of Contents
- What Custom Bathroom Vanity Installation Really Involves
- Bathroom Vanity Installation Cost: What Moves the Number
- Bathroom Vanity Measurements and Fit Checks Before You Order
- Frequently Asked Questions
What Custom Bathroom Vanity Installation Really Involves
Custom bathroom vanity installation in Pickering means removing the old vanity, checking wall, plumbing and flooring, and fitting a made to measure cabinet, countertop, sink and faucet so it sits level, drains correctly and closes cleanly.
The work runs in order: remove the old vanity and shut off the water; inspect the wall and confirm drain and supply line alignment; measure the alcove and check the walls are square; build and fit the cabinet, shimming it level; cut and install the countertop and sink; connect the faucet, drain and supply lines; then seal the edges and test for leaks. Two steps often cause trouble in DIY attempts: older homes rarely have square corners, so a cabinet built to nominal width can leave a visible gap, and moving the drain even a few inches is plumbing work, not carpentry.
To see how the vanity decision fits a wider remodel, read how a design consultation works. For larger projects, our guide to planning a full service bathroom renovation covers sequencing and what to expect.

Bathroom Vanity Installation Cost: What Moves the Number
Bathroom vanity installation cost depends on several factors, including cabinet size and construction, countertop material, whether plumbing has to move, and how much of the old unit must be removed and disposed of.
| Factor | What drives the cost | Where it adds time |
|---|---|---|
| Cabinet size and style | Wider units, drawers and custom doors | Build and fitting |
| Countertop material | Cutouts, edge profiles, seams | Templating and install |
| Plumbing position | Moving the drain or supply lines | Rough in and inspection |
Because every bathroom is different, pricing depends on the scope of the project. For a broader benchmark, see Bathroom Renovation Costs in Durham Region. For current prices or a quote, visit the Classic Kitchens website.
Get Started on your Bathroom project Today ! →
Bathroom Vanity Measurements and Fit Checks Before You Order
Bathroom vanity measurements come down to five numbers: alcove width, depth from wall to front, height to the top of the counter, floor to drain distance, and clearance in front of the vanity. Measure the alcove at the back, middle and front; if the numbers differ, the walls are out of square and the cabinet must be built to the smallest figure with a filler piece. Doors and drawers must clear the doorway, toilet and any radiator before ordering.
If you are still deciding on the overall look, our bathroom renovation ideas guide shows how vanity placement affects storage, light and traffic flow.
Frequently Asked Questions
How much does custom bathroom vanity installation cost?
There is no single figure, because the price depends on the vanity size, the cabinet material, the countertop, and whether plumbing or electrical has to move. Ask for an itemized project estimate that separates cabinetry, countertop, fixtures, labour, and any plumbing or electrical work, so you can see exactly what you are paying for.
What should I measure before ordering a custom bathroom vanity?
Record the full wall width, the depth from wall to the furthest obstruction, and the height from floor to the finished countertop you want. Note the position of the drain, supply lines, and any outlets, plus door swing and walkway clearance. Measure twice at different points, since walls are rarely square. A designer can confirm the numbers on site before the order is placed, which avoids a cabinet that will not fit.
Do I need a plumber to install a bathroom vanity?
If the new vanity uses the existing drain and supply locations, a skilled installer can usually reconnect the sink and faucet. Anything that moves plumbing, adds a second sink, or changes the drain route needs a licensed plumber, and that work may require a building permit. Ask your contractor who is doing the plumbing and whether a permit is required before work starts.
A vanity that fits properly changes how the whole bathroom works, and getting there starts with accurate measurements and a realistic budget rather than a catalogue photo. Classic Kitchens handles bathroom renovations across Pickering, Ajax, Whitby and Oshawa, with designers on staff to help you choose materials and finishes, and full project management from removal through to the final seal. Get started with Classic Kitchens and plan a vanity that fits your space the first time.